Products

DESCRIPTION

Overview

Basic Info.

Model NO.	HA-J0022
Surface Treatment	Mill Finish
Alloy	Non-alloy
Width	20-2650mm
Length	500-16000mm
Thickness	0.2-500mm
Transport Package	Seaworthy Wooden Pallet
Specification	Custom Size
Trademark	Honesty Aluminum
Origin	China
HS Code	76061199
Production Capacity	15000tons/Month

Product Description

Basic Description

Factory Aluminum Sheet Price
1060 aluminum sheet contains 99.6% Al, which is called pure aluminum sheet. It is another representative product in 1000 series aluminum alloys metal. 1060 aluminum sheet contains 0.05% cooper, thus, its conductivity is 55%. Besides, 1060 aluminum sheet is relatively low strength, essentially pure aluminum alloy with many different tempers, such as HO, H12, H14, H16, H18, etc.

Chemical Composition

Chemical Composition of 1060 aluminum sheet

Elements	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others	Al
Content(Max)	0.25	0.35	0.05	0.03	0.03	-	0.05	0.03	0.15	Remain

Machanical Properties

Mechanical Properties of 1060 aluminum sheet

Alloy and Temper	Specified	Tensile Strength	Yield Strength	Elongation
	Thickness(mm)	(MPa)	(MPa)	(%)
1060-O	0.2-0.3	60-100	Min15	Min15
	0.3-0.5			Min18
	0.5-1.5			Min23
	1.5-6.0			Min25
	6.0-80			Min25
1060-H12	0.5-1.5	80-120	Min60	Min2
	1.5-6.0			Min3
1060-H22	0.5-1.5	Min80	Min60	Min4
	1.5-6.0			Min5
1060-H14	0.2-0.3	95-135	Min70	Min1
	0.3-0.5			Min2
	0.5-0.8			Min2
	0.8-1.5			Min4
	1.5-3.0			Min6
	3.0-6.0			Min10
1060-H24	0.2-0.3	Min95	Min70	Min1
	0.3-0.5			Min2
	0.5-0.8			Min2
	0.8-1.5			Min4
	1.5-3.0			Min6
	3.0-6.0			Min10

Typical Applications

The Feature and application of 1060 aluminum sheet

The main properties of 1060 aluminum sheet are good corrosion resistance, a flat surface, and good forming abilities. It can be formed by hot working or cold working, and its strength is between 110 and 210. However, it does not show good tensile strength.
The aluminum sheet 1060 is widely used in products with low strength requirements, such as chemical instruments, sheet metal processing parts, deep drawing or spinning concave containers, welding parts, heat exchangers, clock surfaces and disk surfaces, nameplates, kitchenware, decorations, reflectors and so on.
The production process of 1060 aluminum sheet is relatively single, the technology is relatively mature, and the market price is very advantageous.
1060 alloy aluminum may be forged in the temperature range of 950 to 700 F. Hot working, If required, may be done in the range of 900 to 500 F.
The cold working characteristics of AL 1060 are excellent. It can readily be cold worked by all conventional methods. Annealing may be done at 650 F followed by air cooling.1060 aluminium alloy metal hardens only from cold working. Tempers H12, H14, H16, H18 are determined by the amount of cold working imparted into the alloy.

Package

Seaworthy packaging

Aluminum Plate/sheet: Interleave paper between plates or blue PE protective film on one side, plastic film and hard paper prevent from damage from outside, and fumigated wooden pallet.

Delivery

25 to 30 days after order confirmation